The lubricating oil filling machine is more suitable for filling various types of oils and fats in bottles and barrels. The filling method using a flow meter can achieve automatic quantification of different bottle types; The filling head comes with a suction function to prevent oil leakage. The system can store 20 sets of formulas. After storage, they can be called up at any time during the production process, with one second conversion. The application is simple and very convenient;

What should I pay attention to when applying devices?

1. During the application of the lubricating oil filling machine, no abnormal noise is allowed. If it is found that it must be stopped for inspection in a timely manner, it is prohibited to carry out inspection and adjustment during the operation of the machine;

2. During the production process of the oil filling machine, the application workers must strictly observe the status of the equipment at every position during cleaning, disinfection, filling, capping, and pressing. If any problems are found, they must be dealt with immediately to avoid accidents;

If the noise of the grease filling machine increases, it means that there is a shortage of oil in the machine gears or there is wear and tear. Therefore, it is necessary to carry out replacement or add engine oil

3. In addition, relative inspections should be carried out on the protective materials worn by personnel or surrounding areas to ensure that they are worn according to regulations, especially for those with long hair who need to wear hats and do a good job in various details; Employees should wear protective equipment and take measures to prevent acid and alkali during the cleaning process of machines;

After turning off the power switch, there is still voltage in the electrical control circuit of the lubricating oil filling machine. When repairing the control circuit of the lubricating oil filling machine, try to unplug the power cord as much as possible.

If you do not use the lubricating oil filling machine every day, you should clean and tidy the machine after application, and perform a simple sealing. However, in the next application, you should also carry out cleaning to avoid residue.